Linux manual pages Section 2  

Name

send, sendto, sendmsg — send a message on a socket

Synopsis

#include <sys/types.h>
#include <sys/socket.h>
ssize_t send( int sockfd,
  const void *buf,
  size_t len,
  int flags);
 
ssize_t sendto( int sockfd,
  const void *buf,
  size_t len,
  int flags,
  const struct sockaddr *dest_addr,
  socklen_t addrlen);
 
ssize_t sendmsg( int sockfd,
  const struct msghdr *msg,
  int flags);
 

DESCRIPTION

The system calls send(), sendto(), and sendmsg() are used to transmit a message to another socket.

The send() call may be used only when the socket is in a connected state (so that the intended recipient is known). The only difference between send() and write(2) is the presence of flags. With a zero flags argument, send() is equivalent to write(2). Also, the following call

send(sockfd, buf, len, flags);

is equivalent to

sendto(sockfd, buf, len, flags, NULL, 0);

The argument sockfd is the file descriptor of the sending socket.

If sendto() is used on a connection-mode (SOCK_STREAM, SOCK_SEQPACKET) socket, the arguments dest_addr and addrlen are ignored (and the error EISCONN may be returned when they are not NULL and 0), and the error ENOTCONN is returned when the socket was not actually connected. Otherwise, the address of the target is given by dest_addr with addrlen specifying its size. For sendmsg(), the address of the target is given by msg.msg_name, with msg.msg_namelen specifying its size.

For send() and sendto(), the message is found in buf and has length len. For sendmsg(), the message is pointed to by the elements of the array msg.msg_iov. The sendmsg() call also allows sending ancillary data (also known as control information).

If the message is too long to pass atomically through the underlying protocol, the error EMSGSIZE is returned, and the message is not transmitted.

No indication of failure to deliver is implicit in a send(). Locally detected errors are indicated by a return value of −1.

When the message does not fit into the send buffer of the socket, send() normally blocks, unless the socket has been placed in nonblocking I/O mode. In nonblocking mode it would fail with the error EAGAIN or EWOULDBLOCK in this case. The select(2) call may be used to determine when it is possible to send more data.

The flags argument is the bitwise OR of zero or more of the following flags.

MSG_CONFIRM (Since Linux 2.3.15)

Tell the link layer that forward progress happened: you got a successful reply from the other side. If the link layer doesn't get this it will regularly reprobe the neighbor (e.g., via a unicast ARP). Only valid on SOCK_DGRAM and SOCK_RAW sockets and currently only implemented for IPv4 and IPv6. See arp(7) for details.

MSG_DONTROUTE

Don't use a gateway to send out the packet, only send to hosts on directly connected networks. This is usually used only by diagnostic or routing programs. This is only defined for protocol families that route; packet sockets don't.

MSG_DONTWAIT (since Linux 2.2)

Enables nonblocking operation; if the operation would block, EAGAIN or EWOULDBLOCK is returned (this can also be enabled using the O_NONBLOCK flag with the F_SETFL fcntl(2)).

MSG_EOR (since Linux 2.2)

Terminates a record (when this notion is supported, as for sockets of type SOCK_SEQPACKET).

MSG_MORE (Since Linux 2.4.4)

The caller has more data to send. This flag is used with TCP sockets to obtain the same effect as the TCP_CORK socket option (see tcp(7)), with the difference that this flag can be set on a per-call basis.

Since Linux 2.6, this flag is also supported for UDP sockets, and informs the kernel to package all of the data sent in calls with this flag set into a single datagram which is only transmitted when a call is performed that does not specify this flag. (See also the UDP_CORK socket option described in udp(7).)

MSG_NOSIGNAL (since Linux 2.2)

Requests not to send SIGPIPE on errors on stream oriented sockets when the other end breaks the connection. The EPIPE error is still returned.

MSG_OOB

Sends out-of-band data on sockets that support this notion (e.g., of type SOCK_STREAM); the underlying protocol must also support out-of-band data.

The definition of the msghdr structure follows. See recv(2) and below for an exact description of its fields.

struct msghdr {
  void * msg_name;
/* optional address */
  socklen_t   msg_namelen;
/* size of address */
  struct iovec * msg_iov;
/* scatter/gather array */
  size_t   msg_iovlen;
/* # elements in msg_iov */
  void * msg_control;
/* ancillary data, see below */
  size_t   msg_controllen;
/* ancillary data buffer len */
  int   msg_flags;
/* flags on received message */
};

You may send control information using the msg_control and msg_controllen members. The maximum control buffer length the kernel can process is limited per socket by the value in /proc/sys/net/core/optmem_max; see socket(7).

RETURN VALUE

On success, these calls return the number of characters sent. On error, −1 is returned, and errno is set appropriately.

ERRORS

These are some standard errors generated by the socket layer. Additional errors may be generated and returned from the underlying protocol modules; see their respective manual pages.

EACCES

(For UNIX domain sockets, which are identified by pathname) Write permission is denied on the destination socket file, or search permission is denied for one of the directories the path prefix. (See path_resolution(7).)

EAGAIN or EWOULDBLOCK

The socket is marked nonblocking and the requested operation would block. POSIX.1-2001 allows either error to be returned for this case, and does not require these constants to have the same value, so a portable application should check for both possibilities.

EBADF

An invalid descriptor was specified.

ECONNRESET

Connection reset by peer.

EDESTADDRREQ

The socket is not connection-mode, and no peer address is set.

EFAULT

An invalid user space address was specified for an argument.

EINTR

A signal occurred before any data was transmitted; see signal(7).

EINVAL

Invalid argument passed.

EISCONN

The connection-mode socket was connected already but a recipient was specified. (Now either this error is returned, or the recipient specification is ignored.)

EMSGSIZE

The socket type requires that message be sent atomically, and the size of the message to be sent made this impossible.

ENOBUFS

The output queue for a network interface was full. This generally indicates that the interface has stopped sending, but may be caused by transient congestion. (Normally, this does not occur in Linux. Packets are just silently dropped when a device queue overflows.)

ENOMEM

No memory available.

ENOTCONN

The socket is not connected, and no target has been given.

ENOTSOCK

The argument sockfd is not a socket.

EOPNOTSUPP

Some bit in the flags argument is inappropriate for the socket type.

EPIPE

The local end has been shut down on a connection oriented socket. In this case the process will also receive a SIGPIPE unless MSG_NOSIGNAL is set.

CONFORMING TO

4.4BSD, SVr4, POSIX.1-2001. These function calls appeared in 4.2BSD.

POSIX.1-2001 only describes the MSG_OOB and MSG_EOR flags. POSIX.1-2008 adds a specification of MSG_NOSIGNAL. The MSG_CONFIRM flag is a Linux extension.

NOTES

The prototypes given above follow the Single UNIX Specification, as glibc2 also does; the flags argument was int in 4.x BSD, but unsigned int in libc4 and libc5; the len argument was int in 4.x BSD and libc4, but size_t in libc5; the addrlen argument was int in 4.x BSD and libc4 and libc5. See also accept(2).

According to POSIX.1-2001, the msg_controllen field of the msghdr structure should be typed as socklen_t, but glibc currently types it as size_t.

BUGS

Linux may return EPIPE instead of ENOTCONN.

EXAMPLE

An example of the use of sendto() is shown in getaddrinfo(3).

SEE ALSO

fcntl(2), getsockopt(2), recv(2), select(2), sendfile(2), shutdown(2), socket(2), write(2), cmsg(3), ip(7), socket(7), tcp(7), udp(7)

COLOPHON

This page is part of release 3.35 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://man7.org/linux/man-pages/.


  Copyright (c) 1983, 1991 The Regents of the University of California.
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in the
   documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software
   must display the following acknowledgement:
This product includes software developed by the University of
California, Berkeley and its contributors.
4. Neither the name of the University nor the names of its contributors
   may be used to endorse or promote products derived from this software
   without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.

Modified 1993-07-24 by Rik Faith <faithcs.unc.edu>
Modified 1996-10-22 by Eric S. Raymond <esrthyrsus.com>
Modified Oct 1998 by Andi Kleen
Modified Oct 2003 by aeb
Modified 2004-07-01 by mtk