Name

ldif — LDAP Data Interchange Format

DESCRIPTION

The LDAP Data Interchange Format (LDIF) is used to represent LDAP entries and change records in text form. LDAP tools, such as ldapadd(1) and ldapsearch(1), read and write LDIF entry records. ldapmodify(1) reads LDIF change records.

This manual page provides a basic description of LDIF. A formal specification of LDIF is published in RFC 2849.

ENTRY RECORDS

LDIF entry records are used to represent directory entries. The basic form of an entry record is:

        dn: <distinguished name>
        <attrdesc>: <attrvalue>
        <attrdesc>: <attrvalue>
        <attrdesc>:: <base64-encoded-value>
        <attrdesc>:< <URL>
        ...

The value may be specified as UTF-8 text or as base64 encoded data, or a URI may be provided to the location of the attribute value.

A line may be continued by starting the next line with a single space or tab, e.g.,

        dn: cn=Barbara J Jensen,dc=exam
         ple,dc=com

Lines beginning with a sharp sign ('#') are ignored.

Multiple attribute values are specified on separate lines, e.g.,

        cn: Barbara J Jensen
        cn: Babs Jensen

If an value contains a non-printing character, or begins with a space or a colon ':', the <attrtype> is followed by a double colon and the value is encoded in base 64 notation. e.g., the value " begins with a space" would be encoded like this:

        cn:: IGJlZ2lucyB3aXRoIGEgc3BhY2U=

If the attribute value is located in a file, the <attrtype> is followed by a ':<' and a file: URI. e.g., the value contained in the file /tmp/value would be listed like this:

        cn:< file:///tmp/value

Other URI schemes (ftp,http) may be supported as well.

Multiple entries within the same LDIF file are separated by blank lines.

ENTRY RECORD EXAMPLE

Here is an example of an LDIF file containing three entries.

        dn: cn=Barbara J Jensen,dc=example,dc=com
        cn: Barbara J Jensen
        cn: Babs Jensen
        objectclass: person
        description:< file:///tmp/babs
        sn: Jensen

        dn: cn=Bjorn J Jensen,dc=example,dc=com
        cn: Bjorn J Jensen
        cn: Bjorn Jensen
        objectclass: person
        sn: Jensen

        dn: cn=Jennifer J Jensen,dc=example,dc=com
        cn: Jennifer J Jensen
        cn: Jennifer Jensen
        objectclass: person
        sn: Jensen
        jpegPhoto:: /9j/4AAQSkZJRgABAAAAAQABAAD/2wBDABALD
         A4MChAODQ4SERATGCgaGBYWGDEjJR0oOjM9PDkzODdASFxOQ
         ERXRTc4UG1RV19iZ2hnPk1xeXBkeFxlZ2P/2wBDARESEhgVG
        ...

Note that the description in Barbara Jensen's entry is read from file:///tmp/babs and the jpegPhoto in Jennifer Jensen's entry is encoded using base 64.

CHANGE RECORDS

LDIF change records are used to represent directory change requests. Each change record starts with line indicating the distinguished name of the entry being changed:

        dn: <distinguishedname>
        changetype: <[modify|add|delete|modrdn]>

Finally, the change information itself is given, the format of which depends on what kind of change was specified above. For a changetype of modify, the format is one or more of the following:

        add: <attributetype>
        <attrdesc>: <value1>
        <attrdesc>: <value2>
        ...
        −

Or, for a replace modification:

        replace: <attributetype>
        <attrdesc>: <value1>
        <attrdesc>: <value2>
        ...
        −

If no attributetype lines are given to replace, the entire attribute is to be deleted (if present).

Or, for a delete modification:

        delete: <attributetype>
        <attrdesc>: <value1>
        <attrdesc>: <value2>
        ...
        −

If no attributetype lines are given to delete, the entire attribute is to be deleted.

For a changetype of add, the format is:

        <attrdesc1>: <value1>
        <attrdesc1>: <value2>
        ...
        <attrdescN>: <value1>
        <attrdescN>: <value2>

For a changetype of modrdn or moddn, the format is:

        newrdn: <newrdn>
        deleteoldrdn: 0 | 1
        newsuperior: <DN>

where a value of 1 for deleteoldrdn means to delete the values forming the old rdn from the entry, and a value of 0 means to leave the values as non-distinguished attributes in the entry. The newsuperior line is optional and, if present, specifies the new superior to move the entry to.

For a changetype of delete, no additional information is needed in the record.

Note that attribute values may be presented using base64 or in files as described for entry records. Lines in change records may be continued in the manner described for entry records as well.

CHANGE RECORD EXAMPLE

The following sample LDIF file contains a change record of each type of change.

        dn: cn=Babs Jensen,dc=example,dc=com
        changetype: add
        objectclass: person
        objectclass: extensibleObject
        cn: babs
        cn: babs jensen
        sn: jensen

        dn: cn=Babs Jensen,dc=example,dc=com
        changetype: modify
        add: givenName
        givenName: Barbara
        givenName: babs
        −
        replace: description
        description: the fabulous babs
        −
        delete: sn
        sn: jensen
        −

        dn: cn=Babs Jensen,dc=example,dc=com
        changetype: modrdn
        newrdn: cn=Barbara J Jensen
        deleteoldrdn: 0
        newsuperior: ou=People,dc=example,dc=com

        dn: cn=Barbara J Jensen,ou=People,dc=example,dc=com
        changetype: delete

INCLUDE STATEMENT

The LDIF parser has been extended to support an include statement for referencing other LDIF files. The include statement must be separated from other records by a blank line. The referenced file is specified using a file: URI and all of its contents are incorporated as if they were part of the original LDIF file. As above, other URI schemes may be supported. For example:

        dn: dc=example,dc=com
        objectclass: domain
        dc: example

        include: file:///tmp/example.com.ldif

        dn: dc=example,dc=org
        objectclass: domain
        dc: example

This feature is not part of the LDIF specification in RFC 2849 but is expected to appear in a future revision of this spec. It is supported by the ldapadd(1), ldapmodify(1), and slapadd(8) commands.

SEE ALSO

ldap(3), ldapsearch(1), ldapadd(1), ldapmodify(1), slapadd(8), slapcat(8), slapd-ldif(5), slapd.replog(5).

"LDAP Data Interchange Format," Good, G., RFC 2849.

ACKNOWLEDGEMENTS

OpenLDAP Software is developed and maintained by The OpenLDAP Project <http://www.openldap.org/>. OpenLDAP Software is derived from University of Michigan LDAP 3.3 Release.


See the following documents: COPYRIGHTLICENSE